Roland DWX-4 4-Axis Compact Dental Milling Machine

Specification:

MODEL DWX-4
CUTTABLE MATERIAL Zirconia (pre-sintered), Wax, PMMA, Composite resin
LOADABLE WORKPIECE SHAPE BLOCK 76 (W) × 38 (D) x 10 to 22 (H) mm
PIN TYPE Max. 85 (W) x 40 (D) x 22 (H) mm
OPERATING SPEED XYZ axis: 6 to 1800 mm/min. (0.24 to 70.8 in./min.)
SPINDLE MOTOR Brushless DC motor
SPINDLE SPEED 6000 to 30000 rpm
ROTARY AXIS TRAVEL ANGLE A: ±360°
NUMBER OF TOOLS HOUSED 2 (option to increase to 4)
ATTACHABLE TOOL Shank diameter: 4 mm, Length: 40 to 55 mm
COMPATIBLE COMPRESSED AIR 0.02 to 0.2 MPa
INTERFACE USB
CONTROL COMMAND SET RML-1, NC code
POWER REQUIREMENTS VOLTAGE AND FREQUENCY AC100 to 240 V ± 10 %, 50/60 Hz, 0.8 to 0.4 A (overvoltage category II, IEC 60664-1)
POWER CONSUMPTION Approx. 70 W
OPERATING NOISE DURING OPERATION: 70 dB (A) or less (when not cutting)
DURING STANDBY: 40 dB (A) or less
EXTERNAL DIMENSIONS 340 (W) × 365 (D) × 405 (H) mm (13.4 × 14.4 × 16.0 in.)
WEIGHT 22 kg (48.5 lb)
INSTALLATION ENVIRONMENT INDOOR USE, ALTITUDE: up to 2000 m
TEMPERATURE: 5 to 40 °C (41 to 104 °F)
RELATIVE HUMIDITY: 35 to 80 % (no condensate)
AMBIENT POLLUTION DEGREE: 2 (as specified by IEC 60664-1)
SHORT-TERM TEMPORARY OVERVOLTAGE: 1440 V
LONG-TERM TEMPORARY OVERVOLTAGE: 490 V
INCLUDED ITEMS Power cable, USB cable, Manual, Software Package CD-ROM, Detection pin, Automatic correction jig, Clamp for block workpiece, Hexagonal screwdriver, spanner, Tool holder, Tool positioner, Dust collection hose, Regulator, etc.